Rear Door Glass - Dark Tinted and Heated for Pre 02' Land Rover Defenders 90/110 - (Bonded)

This replacement Rear Door Glass is designed to be BONDED to the inside of the rear door, suitable for doors that are flat at the bottom of the aperture, as shown in the photos above. This is usually Defenders Pre-2002, but you may have fitted a newer door so make sure to double-check.

• Standard size replacement. (Original Part Number: LR042729)
• High-quality Masai product.
• 4mm toughened (tempered) safety glass E43R, 00320 DOT6. European Commission Directive 2001/92/EC, Regulation No 43 of the UN/ECE. DOT6 US motor vehicle specification.
• 70% no light transmission high quality factory-prepared dark tint - NOT an attached film which can be scratched or peeled off. Appears as grey with a hint of green.
• Heat reflecting coating, glare reduction glass.

Optional Extras

We think you may also be interested in these optional extras which you can see below and separately add to your shopping cart. Scroll down to "You May Also Like" section.

• Adhesive Sealant - needed for Pre 2002 Defenders only. (SORRY, UK ONLY SHIPPING)
• Rear Door Glass Retainer Kit - for Pre 2002 Defender Rear Doors only.
• Pair of Studs - should you wish to fit a high-level brake light.
• Rear High-Level LED Brake Light - slimline or standard (if you are not reusing your existing brake light).
• Dark-tinted Quarter Light Windows - variants: Standard oval, Masai Zeppelin and Masai Panoramic (NOTE: you will need a 310ml Window Bonding Adhesive Set (UK ONLY Shipping) if you also purchase Masai Zeppelin or Masai Panoramic quarterlights).

CUSTOMERS OUTSIDE THE UK: Sorry, we cannot ship window adhesive sealant outside the UK due to customs issues, please do not order. You will need to source them locally. The Adhesive Sealant below will give you a guide for what you need to source.